46 lines
1.1 KiB
Markdown
46 lines
1.1 KiB
Markdown
# Unitree Joystick Input Node
|
|
|
|
This node will listen to the wireless remote topic and publish a `unitree_go::msg::dds_::WirelessController_` message by using `unitree_sdk2`.
|
|
|
|
> Before use this node, please use `ifconfig` command to check the network interface to connect to the robot, then change the parameter in launch file.
|
|
|
|
Tested environment:
|
|
* Ubuntu 24.04
|
|
* ROS2 Jazzy
|
|
|
|
### Build Command
|
|
```bash
|
|
cd ~/ros2_ws
|
|
colcon build --packages-up-to unitree_joystick_input --symlink-install
|
|
```
|
|
|
|
### Launch Command
|
|
```bash
|
|
source ~/ros2_ws/install/setup.bash
|
|
ros2 launch unitree_joystick_input joystick.launch.py
|
|
```
|
|
|
|
## 1. Use Instructions for Controllers
|
|
|
|
### 1.1 Unitree Guide Controller
|
|
* Passive Mode: select
|
|
* Fixed Down: start
|
|
* Fixed Stand: start
|
|
* Free Stand: right + X
|
|
* Trot: right + Y
|
|
* SwingTest: right + B
|
|
* Balance: right + A
|
|
|
|
### 1.2 OCS2 Quadruped Controller
|
|
* Passive Mode: select
|
|
* OCS2 Mode: start
|
|
* Stance: start
|
|
* trot: right + X
|
|
* standing trot: right + Y
|
|
* flying_trot: right + B
|
|
|
|
### 1.3 RL Quadruped Controller
|
|
* Passive Mode: select
|
|
* Fixed Down: start
|
|
* Fixed Stand: start
|
|
* RL Mode: right + X |