unitree_rl_gym/deploy/deploy_real/deploy_real_ros_eetrack.py

from legged_gym import LEGGED_GYM_ROOT_DIR
from typing import Union
import numpy as np
import time
import torch

import rclpy as rp
from unitree_hg.msg import LowCmd as LowCmdHG, LowState as LowStateHG
from unitree_go.msg import LowCmd as LowCmdGo, LowState as LowStateGo
from tf2_ros import TransformException
from tf2_ros.buffer import Buffer
from tf2_ros.transform_listener import TransformListener
from common.command_helper_ros import create_damping_cmd, create_zero_cmd, init_cmd_hg, init_cmd_go, MotorMode
from common.rotation_helper import get_gravity_orientation, transform_imu_data
from common.remote_controller import RemoteController, KeyMap
from config import Config
from common.crc import CRC
from enum import Enum

class Mode(Enum):
    wait = 0
    zero_torque = 1
    default_pos = 2
    damping = 3
    policy = 4
    null = 5
        
def body_pose_axa(frame:str):
    """ --> tf does not exist """
    try:
        t = tf_buffer.lookup_transform(
            to_frame_rel,
            from_frame_rel,
            rclpy.time.Time())
    except TransformException as ex:
        print(f'Could not transform {to_frame_rel} to {from_frame_rel}: {ex}')
        return (np.zeros(3), np.zeros(3))

    txn = t.transform.translation
    rxn = t.transform.rotation

    xyz = [txn.x, txn.y, txn.z]
    quat_wxyz = [rxn.w, rxn.x, rxn.y, rxn.z]

    xyz = np.array(xyz)
    axa = axa_from_quat(quat_wxyz)

    return (xyz, axa)


class Observation:
    def __init__(self, tf_buffer:Buffer):
        self.tf_buffer = tf_buffer

    
    def __call__(self,
                 low_state: LowStateHG,
                 last_action: np.ndarray
                 ):
        # observation terms (order preserved)

        # NOTE(ycho): dummy value
        # base_lin_vel = np.zeros(3)
        base_ang_vel = np.array([low_state.imu_state.gyroscope],
                                dtype=np.float32)

        # FIXME(ycho): check if the convention "q_base^{-1} @ g" holds.
        quat = low_state.imu_state.quaternion
        projected_gravity = get_gravity_orientation(quat)

        fp_l = body_pose_axa('left_ankle_roll_link')
        fp_r = body_pose_axa('right_ankle_roll_link')
        foot_pose = np.concatenate([fp_l[0], fp_r[0], fp_l[1], fp_r[1]])

        hp_l = body_pose_axa('left_hand_palm_link')
        hp_r = body_pose_axa('right_hand_palm_link')
        hand_pose = np.concatenate([hp_l[0], hp_r[0], hp_l[1], hp_r[1]])

        projected_com = _
        # projected_zmp = _ # IMPOSSIBLE

        # Map `low_state` to index-mapped joint_{pos,vel}
        joint_pos = np.zeros(num_lab_actions,
                            dtype=np.float32)
        joint_vel = np.zeros(num_lab_actions,
                            dtype=np.float32)
        joint_pos[lab_from_mot] = [low_state.motor_state[i_mot].q for i_mot in
                                range(len(lab_from_mot))]
        joint_vel[lab_from_mot] = [low_state.motor_state[i_mot].dq for i_mot in
                                range(len(lab_from_mot))]
        actions = last_action

        hands_command = _ # goal
        right_arm_com = _
        left_arm_com = _
        pelvis_height = _



class Controller:
    def __init__(self, config: Config) -> None:
        self.config = config
        self.remote_controller = RemoteController()

        # Initialize the policy network
        self.policy = torch.jit.load(config.policy_path)
        # Initializing process variables
        self.qj = np.zeros(config.num_actions, dtype=np.float32)
        self.dqj = np.zeros(config.num_actions, dtype=np.float32)
        self.action = np.zeros(config.num_actions, dtype=np.float32)
        self.target_dof_pos = config.default_angles.copy()
        self.obs = np.zeros(config.num_obs, dtype=np.float32)
        self.cmd = np.array([0.0, 0, 0])
        self.counter = 0

        rp.init()
        self._node = rp.create_node("low_level_cmd_sender")

        if config.msg_type == "hg":
            # g1 and h1_2 use the hg msg type

            self.low_cmd = LowCmdHG()
            self.low_state = LowStateHG()

            self.lowcmd_publisher_ = self._node.create_publisher(LowCmdHG,
                                'lowcmd', 10)
            self.lowstate_subscriber = self._node.create_subscription(LowStateHG,
                                'lowstate', self.LowStateHgHandler, 10)
            self.mode_pr_ = MotorMode.PR
            self.mode_machine_ = 0

            # self.lowcmd_publisher_ = ChannelPublisher(config.lowcmd_topic, LowCmdHG)
            # self.lowcmd_publisher_.Init()

            # self.lowstate_subscriber = ChannelSubscriber(config.lowstate_topic, LowStateHG)
            # self.lowstate_subscriber.Init(self.LowStateHgHandler, 10)

        elif config.msg_type == "go":
            raise ValueError(f"{config.msg_type} is not implemented yet.")

        else:
            raise ValueError("Invalid msg_type")

        # wait for the subscriber to receive data
        # self.wait_for_low_state()

        # Initialize the command msg
        if config.msg_type == "hg":
            init_cmd_hg(self.low_cmd, self.mode_machine_, self.mode_pr_)
        elif config.msg_type == "go":
            init_cmd_go(self.low_cmd, weak_motor=self.config.weak_motor)

        self.mode = Mode.wait
        self._mode_change = True
        self._timer = self._node.create_timer(self.config.control_dt, self.run_wrapper)
        self._terminate = False
        try:
            rp.spin(self._node)
        except KeyboardInterrupt:
            print("KeyboardInterrupt")
        finally:
            self._node.destroy_timer(self._timer)
            create_damping_cmd(self.low_cmd)
            self.send_cmd(self.low_cmd)
            self._node.destroy_node()
            rp.shutdown()
            print("Exit")

    def LowStateHgHandler(self, msg: LowStateHG):
        self.low_state = msg
        self.mode_machine_ = self.low_state.mode_machine
        self.remote_controller.set(self.low_state.wireless_remote)

    def LowStateGoHandler(self, msg: LowStateGo):
        self.low_state = msg
        self.remote_controller.set(self.low_state.wireless_remote)

    def send_cmd(self, cmd: Union[LowCmdGo, LowCmdHG]):
        cmd.mode_machine = self.mode_machine_
        cmd.crc = CRC().Crc(cmd)
        size = len(cmd.motor_cmd)
        # print(cmd.mode_machine)
        # for i in range(size):
        #     print(i, cmd.motor_cmd[i].q, 
        #         cmd.motor_cmd[i].dq,
        #         cmd.motor_cmd[i].kp,
        #         cmd.motor_cmd[i].kd,
        #         cmd.motor_cmd[i].tau)
        self.lowcmd_publisher_.publish(cmd)

    def wait_for_low_state(self):
        while self.low_state.crc == 0:
            print(self.low_state)
            time.sleep(self.config.control_dt)
        print("Successfully connected to the robot.")

    def zero_torque_state(self):
        if self.remote_controller.button[KeyMap.start] == 1:
            self._mode_change = True
            self.mode = Mode.default_pos
        else:
            create_zero_cmd(self.low_cmd)
            self.send_cmd(self.low_cmd)

    def prepare_default_pos(self):
        # move time 2s
        total_time = 2
        self.counter = 0
        self._num_step = int(total_time / self.config.control_dt)
        
        dof_idx = self.config.leg_joint2motor_idx + self.config.arm_waist_joint2motor_idx
        kps = self.config.kps + self.config.arm_waist_kps
        kds = self.config.kds + self.config.arm_waist_kds
        self._kps = [float(kp) for kp in kps]
        self._kds = [float(kd) for kd in kds]
        self._default_pos = np.concatenate((self.config.default_angles, self.config.arm_waist_target), axis=0)
        self._dof_size = len(dof_idx)
        self._dof_idx = dof_idx
        
        # record the current pos
        self._init_dof_pos = np.zeros(self._dof_size,
                                dtype=np.float32)
        for i in range(self._dof_size):
            self._init_dof_pos[i] = self.low_state.motor_state[dof_idx[i]].q

    def move_to_default_pos(self):
        # move to default pos
        if self.counter < self._num_step:
            alpha = self.counter / self._num_step
            for j in range(self._dof_size):
                motor_idx = self._dof_idx[j]
                target_pos = self._default_pos[j]
                self.low_cmd.motor_cmd[motor_idx].q = (self._init_dof_pos[j] * 
                                                        (1 - alpha) + target_pos * alpha)
                self.low_cmd.motor_cmd[motor_idx].dq = 0.0
                self.low_cmd.motor_cmd[motor_idx].kp = self._kps[j]
                self.low_cmd.motor_cmd[motor_idx].kd = self._kds[j]
                self.low_cmd.motor_cmd[motor_idx].tau = 0.0
            self.send_cmd(self.low_cmd)
            self.counter += 1
        else:
            self._mode_change = True
            self.mode = Mode.damping

    def default_pos_state(self):
        if self.remote_controller.button[KeyMap.A] != 1:
            for i in range(len(self.config.leg_joint2motor_idx)):
                motor_idx = self.config.leg_joint2motor_idx[i]
                self.low_cmd.motor_cmd[motor_idx].q = float(self.config.default_angles[i])
                self.low_cmd.motor_cmd[motor_idx].dq = 0.0
                self.low_cmd.motor_cmd[motor_idx].kp = self._kps[i]
                self.low_cmd.motor_cmd[motor_idx].kd = self._kds[i]
                self.low_cmd.motor_cmd[motor_idx].tau = 0.0
            for i in range(len(self.config.arm_waist_joint2motor_idx)):
                motor_idx = self.config.arm_waist_joint2motor_idx[i]
                self.low_cmd.motor_cmd[motor_idx].q = float(self.config.arm_waist_target[i])
                self.low_cmd.motor_cmd[motor_idx].dq = 0.0
                self.low_cmd.motor_cmd[motor_idx].kp = self._kps[i]
                self.low_cmd.motor_cmd[motor_idx].kd = self._kds[i]
                self.low_cmd.motor_cmd[motor_idx].tau = 0.0
            self.send_cmd(self.low_cmd)
        else:
            self._mode_change = True
            self.mode = Mode.policy

    def run_policy(self):
        if self.remote_controller.button[KeyMap.select] == 1:
            self._mode_change = True
            self.mode = Mode.null
            return
        self.counter += 1
        # Get the current joint position and velocity
        for i in range(len(self.config.leg_joint2motor_idx)):
            self.qj[i] = self.low_state.motor_state[self.config.leg_joint2motor_idx[i]].q
            self.dqj[i] = self.low_state.motor_state[self.config.leg_joint2motor_idx[i]].dq

        # imu_state quaternion: w, x, y, z
        quat = self.low_state.imu_state.quaternion
        ang_vel = np.array([self.low_state.imu_state.gyroscope], dtype=np.float32)

        if self.config.imu_type == "torso":
            # h1 and h1_2 imu is on the torso
            # imu data needs to be transformed to the pelvis frame
            waist_yaw = self.low_state.motor_state[self.config.arm_waist_joint2motor_idx[0]].q
            waist_yaw_omega = self.low_state.motor_state[self.config.arm_waist_joint2motor_idx[0]].dq
            quat, ang_vel = transform_imu_data(waist_yaw=waist_yaw, waist_yaw_omega=waist_yaw_omega, imu_quat=quat, imu_omega=ang_vel)

        # create observation
        gravity_orientation = get_gravity_orientation(quat)
        qj_obs = self.qj.copy()
        dqj_obs = self.dqj.copy()
        qj_obs = (qj_obs - self.config.default_angles) * self.config.dof_pos_scale
        dqj_obs = dqj_obs * self.config.dof_vel_scale
        ang_vel = ang_vel * self.config.ang_vel_scale
        period = 0.8
        count = self.counter * self.config.control_dt
        phase = count % period / period
        sin_phase = np.sin(2 * np.pi * phase)
        cos_phase = np.cos(2 * np.pi * phase)

        self.cmd[0] = self.remote_controller.ly
        self.cmd[1] = self.remote_controller.lx * -1
        self.cmd[2] = self.remote_controller.rx * -1
        # print(self.remote_controller.ly,
        #     self.remote_controller.lx,
        #     self.remote_controller.rx)
        # self.cmd[0] = 0.0
        # self.cmd[1] = 0.0
        # self.cmd[2] = 0.0

        num_actions = self.config.num_actions
        self.obs[:3] = ang_vel
        self.obs[3:6] = gravity_orientation
        self.obs[6:9] = self.cmd * self.config.cmd_scale * self.config.max_cmd
        self.obs[9 : 9 + num_actions] = qj_obs
        self.obs[9 + num_actions : 9 + num_actions * 2] = dqj_obs
        self.obs[9 + num_actions * 2 : 9 + num_actions * 3] = self.action
        self.obs[9 + num_actions * 3] = sin_phase
        self.obs[9 + num_actions * 3 + 1] = cos_phase

        # Get the action from the policy network
        obs_tensor = torch.from_numpy(self.obs).unsqueeze(0)
        self.action = self.policy(obs_tensor).detach().numpy().squeeze()
        
        # transform action to target_dof_pos
        target_dof_pos = self.config.default_angles + self.action * self.config.action_scale

        # Build low cmd
        for i in range(len(self.config.leg_joint2motor_idx)):
            motor_idx = self.config.leg_joint2motor_idx[i]
            self.low_cmd.motor_cmd[motor_idx].q = float(target_dof_pos[i])
            self.low_cmd.motor_cmd[motor_idx].dq = 0.0
            self.low_cmd.motor_cmd[motor_idx].kp = float(self.config.kps[i])
            self.low_cmd.motor_cmd[motor_idx].kd = float(self.config.kds[i])
            self.low_cmd.motor_cmd[motor_idx].tau = 0.0

        for i in range(len(self.config.arm_waist_joint2motor_idx)):
            motor_idx = self.config.arm_waist_joint2motor_idx[i]
            self.low_cmd.motor_cmd[motor_idx].q = float(self.config.arm_waist_target[i])
            self.low_cmd.motor_cmd[motor_idx].dq = 0.0
            self.low_cmd.motor_cmd[motor_idx].kp = float(self.config.arm_waist_kps[i])
            self.low_cmd.motor_cmd[motor_idx].kd = float(self.config.arm_waist_kds[i])
            self.low_cmd.motor_cmd[motor_idx].tau = 0.0

        # send the command
        self.send_cmd(self.low_cmd)

    def run_wrapper(self):
        # print("hello", self.mode,
        # self.mode == Mode.zero_torque)
        if self.mode == Mode.wait:
            if self.low_state.crc != 0:
                self.mode = Mode.zero_torque
                self.low_cmd.mode_machine = self.mode_machine_
                print("Successfully connected to the robot.")
        elif self.mode == Mode.zero_torque:
            if self._mode_change:
                print("Enter zero torque state.")
                print("Waiting for the start signal...")
                self._mode_change = False
            self.zero_torque_state()
        elif self.mode == Mode.default_pos:
            if self._mode_change:
                print("Moving to default pos.")
                self._mode_change = False
                self.prepare_default_pos()                
            self.move_to_default_pos()
        elif self.mode == Mode.damping:
            if self._mode_change:
                print("Enter default pos state.")
                print("Waiting for the Button A signal...")
                self._mode_change = False
            self.default_pos_state()
        elif self.mode == Mode.policy:
            if self._mode_change:
                print("Run policy.")
                self._mode_change = False
                self.counter = 0
            self.run_policy()
        elif self.mode == Mode.null:
            self._terminate = True

        # time.sleep(self.config.control_dt)

if __name__ == "__main__":
    import argparse

    parser = argparse.ArgumentParser()
    parser.add_argument("config", type=str, help="config file name in the configs folder", default="g1.yaml")
    args = parser.parse_args()

    # Load config
    config_path = f"{LEGGED_GYM_ROOT_DIR}/deploy/deploy_real/configs/{args.config}"
    config = Config(config_path)

    controller = Controller(config)