199 lines
7.3 KiB
Python
199 lines
7.3 KiB
Python
#!/usr/bin/env python
|
|
|
|
# Copyright 2025 The HuggingFace Inc. team. All rights reserved.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
import logging
|
|
import time
|
|
from typing import Any
|
|
|
|
from lerobot.common.cameras.utils import make_cameras_from_configs
|
|
from lerobot.common.constants import OBS_IMAGES, OBS_STATE
|
|
from lerobot.common.errors import DeviceAlreadyConnectedError, DeviceNotConnectedError
|
|
from lerobot.common.motors import Motor, MotorCalibration, MotorNormMode
|
|
from lerobot.common.motors.feetech import (
|
|
FeetechMotorsBus,
|
|
OperatingMode,
|
|
)
|
|
|
|
from ..robot import Robot
|
|
from .config_hope_jr import HopeJrHandConfig
|
|
|
|
logger = logging.getLogger(__name__)
|
|
|
|
|
|
class HopeJrHand(Robot):
|
|
config_class = HopeJrHandConfig
|
|
name = "hope_jr_hand"
|
|
|
|
def __init__(self, config: HopeJrHandConfig):
|
|
super().__init__(config)
|
|
self.config = config
|
|
self.arm = FeetechMotorsBus(
|
|
port=self.config.port,
|
|
motors={
|
|
# Thumb
|
|
"thumb_basel_rotation": Motor(1, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"thumb_mcp": Motor(2, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"thumb_pip": Motor(3, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"thumb_dip": Motor(4, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
# Index
|
|
"index_thumb_side": Motor(5, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"index_pinky_side": Motor(6, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"index_flexor": Motor(7, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
# Middle
|
|
"middle_thumb_side": Motor(8, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"middle_pinky_side": Motor(9, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"middle_flexor": Motor(10, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
# Ring
|
|
"ring_thumb_side": Motor(11, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"ring_pinky_side": Motor(12, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"ring_flexor": Motor(13, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
# Pinky
|
|
"pinky_thumb_side": Motor(14, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"pinky_pinky_side": Motor(15, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
"pinky_flexor": Motor(16, "scs0009", MotorNormMode.RANGE_M100_100),
|
|
},
|
|
)
|
|
self.cameras = make_cameras_from_configs(config.cameras)
|
|
|
|
@property
|
|
def state_feature(self) -> dict:
|
|
return {
|
|
"dtype": "float32",
|
|
"shape": (len(self.arm),),
|
|
"names": {"motors": list(self.arm.motors)},
|
|
}
|
|
|
|
@property
|
|
def action_feature(self) -> dict:
|
|
return self.state_feature
|
|
|
|
@property
|
|
def camera_features(self) -> dict[str, dict]:
|
|
cam_ft = {}
|
|
for cam_key, cam in self.cameras.items():
|
|
cam_ft[cam_key] = {
|
|
"shape": (cam.height, cam.width, cam.channels),
|
|
"names": ["height", "width", "channels"],
|
|
"info": None,
|
|
}
|
|
return cam_ft
|
|
|
|
@property
|
|
def is_connected(self) -> bool:
|
|
# TODO(aliberts): add cam.is_connected for cam in self.cameras
|
|
return self.arm.is_connected
|
|
|
|
def connect(self) -> None:
|
|
"""
|
|
We assume that at connection time, arm is in a rest position,
|
|
and torque can be safely disabled to run calibration.
|
|
"""
|
|
if self.is_connected:
|
|
raise DeviceAlreadyConnectedError(f"{self} already connected")
|
|
|
|
self.arm.connect()
|
|
if not self.is_calibrated:
|
|
self.calibrate()
|
|
|
|
# Connect the cameras
|
|
for cam in self.cameras.values():
|
|
cam.connect()
|
|
|
|
self.configure()
|
|
logger.info(f"{self} connected.")
|
|
|
|
@property
|
|
def is_calibrated(self) -> bool:
|
|
return self.arm.is_calibrated
|
|
|
|
def calibrate(self) -> None:
|
|
raise NotImplementedError # TODO(aliberts): adapt code below (copied from koch)
|
|
logger.info(f"\nRunning calibration of {self}")
|
|
self.arm.disable_torque()
|
|
for name in self.arm.names:
|
|
self.arm.write("Operating_Mode", name, OperatingMode.POSITION.value)
|
|
|
|
input("Move robot to the middle of its range of motion and press ENTER....")
|
|
homing_offsets = self.arm.set_half_turn_homings()
|
|
|
|
full_turn_motor = "wrist_roll"
|
|
unknown_range_motors = [name for name in self.arm.names if name != full_turn_motor]
|
|
logger.info(
|
|
f"Move all joints except '{full_turn_motor}' sequentially through their "
|
|
"entire ranges of motion.\nRecording positions. Press ENTER to stop..."
|
|
)
|
|
range_mins, range_maxes = self.arm.record_ranges_of_motion(unknown_range_motors)
|
|
range_mins[full_turn_motor] = 0
|
|
range_maxes[full_turn_motor] = 4095
|
|
|
|
self.calibration = {}
|
|
for name, motor in self.arm.motors.items():
|
|
self.calibration[name] = MotorCalibration(
|
|
id=motor.id,
|
|
drive_mode=0,
|
|
homing_offset=homing_offsets[name],
|
|
range_min=range_mins[name],
|
|
range_max=range_maxes[name],
|
|
)
|
|
|
|
self.arm.write_calibration(self.calibration)
|
|
self._save_calibration()
|
|
print("Calibration saved to", self.calibration_fpath)
|
|
|
|
def configure(self) -> None:
|
|
self.arm.disable_torque()
|
|
self.arm.configure_motors()
|
|
# TODO
|
|
self.arm.enable_torque()
|
|
|
|
def get_observation(self) -> dict[str, Any]:
|
|
if not self.is_connected:
|
|
raise DeviceNotConnectedError(f"{self} is not connected.")
|
|
|
|
obs_dict = {}
|
|
|
|
# Read arm position
|
|
start = time.perf_counter()
|
|
obs_dict[OBS_STATE] = self.arm.sync_read("Present_Position")
|
|
dt_ms = (time.perf_counter() - start) * 1e3
|
|
logger.debug(f"{self} read state: {dt_ms:.1f}ms")
|
|
|
|
# Capture images from cameras
|
|
for cam_key, cam in self.cameras.items():
|
|
start = time.perf_counter()
|
|
obs_dict[f"{OBS_IMAGES}.{cam_key}"] = cam.async_read()
|
|
dt_ms = (time.perf_counter() - start) * 1e3
|
|
logger.debug(f"{self} read {cam_key}: {dt_ms:.1f}ms")
|
|
|
|
return obs_dict
|
|
|
|
def send_action(self, action: dict[str, Any]) -> dict[str, Any]:
|
|
if not self.is_connected:
|
|
raise DeviceNotConnectedError(f"{self} is not connected.")
|
|
|
|
self.arm.sync_write("Goal_Position", action)
|
|
return action
|
|
|
|
def disconnect(self):
|
|
if not self.is_connected:
|
|
raise DeviceNotConnectedError(f"{self} is not connected.")
|
|
|
|
self.arm.disconnect(self.config.disable_torque_on_disconnect)
|
|
for cam in self.cameras.values():
|
|
cam.disconnect()
|
|
|
|
logger.info(f"{self} disconnected.")
|